63 Code: Open circuit of glow plug
July 04, 2023
The trouble shooting method is :
a. check power supply voltage
b. check the normal temperature resistance of glow plug, it should be 0.2.
c. clean up carbon deposits in glow plug
Details: To measure the resistance of the glow plug, take the two wires(brown and white) off the screws, and take the multi-meter, turn to the ohm unit, and measure the resistance of the two wires. Take a picture of the measurement and send to us to check if the resistance is correct. To make sure the multi-meter is precise and
accurate, Put the two wire pairs together to see if they go to zero. If it does not return to zero, the multi-meter is inaccurate. If the multi-meter is reset to zero, it isaccurate.